Connect your farm to AI.
No need to rebuild your farm. MCM connects to the ACs, dehumidifiers and irrigation you already have, then watches every table, waters by your plan and works out every nutrient dose, day and night.
Senses. Learns. Decides. Reports.
Senses
A controller on every table reads root-zone moisture, EC and temperature, plus air, water flow and tank levels.
Learns
It finds each table's full-pot point by itself and forecasts how much water every room needs tonight.
Decides
Irrigation shots, AC setpoints, dehumidifiers and nutrient doses, all handled automatically, 24/7.
Reports
Alerts on your phone the moment something is off, and a journal card for every light cycle.
We connect to your existing equipment.
Keep your rooms, your ACs and your water system. We add small controllers and sensors, and your equipment becomes part of one smart system.
Your ACs
Controlled through their own remote signal. Any brand with a remote works, no replacement needed.
Your dehumidifiers & fans
Plugged into smart plugs, so the system switches them on and off.
Your irrigation
We add valves and flow meters to your existing lines and tanks.
Your rooms
Wireless room sensors and table sensors go in without new wiring through the walls.
Real screens from a farm running MCM today.
Every room on one screen.
Temperature, humidity and VPD against target, moisture and dryback for each table, and the level of every tank.
Every device. One AI.
Table sensors, valves, AC remotes, room sensors, dehumidifiers and cameras all report to one farm server. You see what is online right now.
ACs and dehumidifiers on autopilot.
Separate day and night targets for every room. The system holds, cools or limits the AC and switches dehumidifiers to keep VPD in range.
You set the plan. It runs it and doses every tank.
- Four daily phases: dryback, ramp-up shots, maintenance, overnight dryback
- Shots go one table at a time and stop at the learned full-pot point
- A, B, C and silica doses calculated from the plan and the tank
- Tonight's water forecast with a safety margin. It never empties a tank
A digital twin of your farm.
Your real layout with live data. Switch between devices, climate and water to see the whole farm at a glance.
Every light cycle on record.
Charts for the day, the feed that went in, every shot, and a plain-language log of what the system did and why.
Less waste. Lower costs. Better harvests.
Less water & nutrient waste
Every dose is calculated and every shot is counted.
Lower power bills
ACs and dehumidifiers run only when the room needs them.
Fewer hours of manual work
No daily hand measurements or dose math for your team.
Fewer lost crops
A failed AC at 3 AM becomes an alert, not a ruined cycle.
Every system is designed around your rooms.
No two farms are the same, so every quote is based on your layout and the devices you need.
Farm visit
We check the equipment you already have and what can connect to it.
Plan & quote
You get a device list and a price for your farm.
Install & tune
We install, connect and tune the system to your crop schedule.
Support
We stay on call, with updates and help when you need it.
We built it for our own farm first.
MCM started inside our own grow rooms in Thailand. Every day our team measured EC and pH by hand, sent the numbers by message and waited for someone to work out the dose. ACs failed at night and nobody knew until morning.
So we connected our existing equipment and built the system we needed: sensors on every table, irrigation by plan, automatic climate and dosing, and alerts that wake us up instead of a ruined crop. It runs our farm every day.
Now we build the same system for other growers, around the rooms and equipment they already have.
Frequently asked questions
What happens if the internet goes down?
The system runs on a computer at your farm, on its own local network. Irrigation, climate control and dosing keep running. Phone alerts and remote access return as soon as the internet is back.
Can I still control things myself?
Yes. Every room can be switched to manual mode in the app, and your existing remotes and switches still work as before.
Which equipment can you connect to?
Any AC with a remote control, dehumidifiers and fans through smart plugs, and your existing irrigation lines and tanks, where we add valves and flow meters. We check everything on the farm visit.
Where is my data kept?
On the farm computer at your site. You decide who has access, and remote access is secured.
Do I need technical knowledge?
No. You use the dashboard on your phone or computer. We install, connect and tune the system, and we support you after.
How much does it cost and how long does it take?
It depends on your farm: the number of rooms and the devices you need. After the farm visit you get a device list, a price and an installation timeline.
